HTDB1150 - Hardtop Bund Covers

PVC Bund Covers View larger

HTDB1150

New product

HTDB1150 - Hardtop Bund Covers

HTDB1150

New product

DATA SHEET

ModelHTDB1150
Weight203kg
Dimensions160×187×250cm
Capacity1150litres
Hardtop cover160x187x250cm
Hardtop cover (with SS supports)160x187x250cm
Hardtop cover only (excludes single IBC containment bund)160x187x197cm
Discharge filter with internal flow distributor & 50mm Camlock130x36cm
Discharge filter adaptor kit4x5cm

Note: Store two bulk containers (IBCs) on this spill pallet to capture leaks, drips and spills.

More details

More info

  •   

    Store one bulky box (IBC) on this covered IBC bund to capture leaks, drips and spills. The hardtop cover prevents rain and dirt entering the bund area.
  • Hardtop cover with roller doors allows access to the bund from both sides.
  • Unique moulded supports allow direct storage of IBCs as well as 205-litre drums (on a wooden pallet) onto the bund.
  • Doors can be locked to prevent unauthorised access.
  • Spill pallet includes 40mm drain plugs at each end of the bund allow for easy decanting of spilt liquids.
  • Covered IBC bund features moulded forklift pockets allow forklift access from two sides.
  • Hardtop cover protects stored containers from UV degradation.
  • Hardtop cover prevents dirt, rainwater and debris from contaminating drums or IBC container.
  • Spill collection bund can contain 110% of a 1000 litre IBC and prevent spilt liquids from contaminating factory floors, inventory or stormwater drains.
  • Spill pallets reduce clean-up costs by providing easily retrievable spills.
  • Polyethylene construction with primed steel stiffeners. Use stainless steel stiffeners when storing liquids that are highly corrosive or have corrosive vapours (request code: HTDB1150CSS).
  • Moulded tie-down points are located on each side of the hardtop cover – ideal for use in high wind areas.
  • Wooden pallet not supplied.
  • Optional bund discharge filters are available to allow oil and fuel capture when draining rainwater from the bund.
  • The filter is packed with super absorbent hydrophobic (water-resistant) polypropylene for 30 litres of absorbency.
  • The filter is fitted with an internal flow distributor and quick release Camlock adaptor.
  • Replacement filter bags can be ordered individually.
  • Made in Australia


Note: Portable bunding units are designed for secondary and temporary storage. If you are unsure on your storage compliance obligations, check with your local council or regulatory body.

Adaptor kit OFB-AK is required when fitting an OFB bund discharge filter to a bund for the first time. Kit contains 1x 50mm full flow ball valve, 1x 50mm x 40mm screwed adaptor, 1x 50mm Camlock male x male adaptor.

 

VIDEO